Drop Shot Rig

As you read on you will see that drop shot bass fishing rigging offers you the opportunity to experiment with any number of hook styles, line types, drop shot weights and plastic drop shot baits.

How Do You Rig It?

Line for a "traditional" drop shot rig is 8lb or 10lb fluorocarbon. The hook is positioned on the line with a Palomar knot anywhere from 18-24" up from the sinker, which is placed on the very end of the tag line. If you're fishing deep water, say 20-30´ deep, the hook can be placed as much as 3-4´ up from the sinker.

There is no set rule about this distance. It can be as short as 6" or as long as 3-4´. With your depth finder determine the "active level" of the bass, that is, where they are holding, and set your hook distance accordingly. You want your lure at that level or above but never below that as bass most often feed up.

Line twist can be a particularly aggravating problem with a drop shot bass fishing rig. The "optional" use of a ball bearing swivel a few inches above the hook, (much twist comes from the bait) or between the hook and weight placed on the bottom end of the tag line will eliminate most of this. I choose to use a swivel or a a sinker with a built in swivel to eliminate twist. I hate line twist!

Hooks for drop shot bass fishing rig are numerous. A small no.2 Octopus-style hook on which a small 4" bait is nose hooked is the historical standard.

However, today's broadened application of the rig allows for the use of any number of hooks and baits. Basically, any light wire, open point, short shank, up-eye hook is good in open water. If fishing heavy cover or structure by flipping or pitching with larger lures then a regular worm hook is called for.

Sinker size for a drop shot bass fishing rig varies based on cover, structure and water depth being fished. But in any event, drop shot weights should be sufficient to keep the rig squarely on the bottom allowing the rig to be lightly worked in place. For a vertical or horizontal (walking) presentation sinkers between 1/8 to 1/2 ounce size will work in most situations.
The black Lindy style elongated sinkers shown at right above have worked well for me when "walking" a rig. They're very snag resistant so hanging up is a rarity for me when I use them on a drop shot bass fishing rig in the rock strewn bottoms of southern reservoirs.

The sinker pictured at right is a Bakudan sinker and has a built in swivel that helps minimize line twist. The weight is merely "pressure clipped" on the line. This allows the sinker to pull off if you get hopelessly snagged while keeping the rest of the rig intact. These are great but there are cheaper alternatives though they have their disadvantages. Some anglers will just use split shot but I can tell you this leads to severe line twist and hang ups. Some will tie on a slip sinker which is a royal pain in the butt if you get hung, break off and have to re-rig.

Drop shot Rig Variations

The drop shot bass fishing rig, originally developed as a finesse approach for fishing deep water or highly pressured waters, has evolved into a multi-faceted rig that can be fished in many different situations. The variations are limited only by your imagination.
I show the following few examples with a swivel, but remember, this is an "option" intended to minimize line twist, not a requirement for functionality. Remember also, that the swivel can be placed above the hook or between the hook and sinker.

One "heavy duty" alternative is to use something like a fluke on an offset hook "up" the line and to use a weighted tube or jig instead of a sinker on the end of the line. Two depths can be covered with this targeting bass on the bottom as well as those holding above. Of course, an exposed hook on the bottom will increase the odds of hanging up if not rigged weedless.
Be aware that creating a drop shot bass fishing rig with a small #1 or #2 hook and small bait "up" on the line and a jig or tube on the bottom creates a problem relative to hook set. The former requires a quick "snap" set and simultaneous reeling while the later requires a heavy "jig bite" set. How do you know which bait was taken when you feel the strike? My suggestion, if you create a combo drop shot bass fishing rig make it either finesse or heavy duty. Don't mix the two.
Another drop shot bass fishing rig alternative is one that is effective fishing weeds and grass as it suspends a craw or jig just under the mat, exactly where the bass are, instead of speeding it past them on the fall.
A 3/4 once jig could even be placed on the bottom of the tag instead of a sinker. You would be covering bass right under the mat as well as on the bottom.

Be sure to use a weight sufficient to punch through the surface mat of the weeds.

If fishing cover or structure a heavier hook and bait that is skin hooked is should be used. At right is a short Senko and a straight round bend worm hook for example. Any number of plastic baits could be used on such a set up.

Combining a drop shot bass fishing rig and Wacky rig can prove very productive as the worm, especially a Senko type bait, has a very tempting action as it is gently jiggled in place.
This can also be modified by using a dropper line from the hook to the main line. As a matter of fact, it's a good way to fish shiners for smallmouth.

This is a nifty and effective drop shot rig I have used with great success. The drop shot fish head is from Swarming Hornet. I put a little 3" Zoom Tiny Fluke on it. It works great for paralleling bluffs.

Be certain to check your local fishing regulations concerning the use of multiple hooks on one line as they are not allowed in some areas.
Rod And Reel Selection For drop shot bass fishing

Rod and reel choice, as always, is a matter of personal preference. I use a couple of technique specific drop shot rods for my finesse drop shot presentation.
One is a G. Loomis, model DSR820S, 6´ 10" long, extra fast action rod for 4-8lb line. I combine this with a Quantum Energy PTi 30 spinning reel.

The other is an All Star model TAS 762S-DS, 6´ 4" long, extra-fast light action rod for 4-8lb line. I combine this with a Daiwa SS1300 spinning reel.

Any spinning rod that has a wispy tip (to impart action to bait), medium action and a bit of backbone in the middle and lower sections will work for a drop shot bass fishing rig. It should be rated for at least 12lb line if you intend to do some "heavy-duty" drop shotting with full size baits and larger hooks. Casting rigs of the same ratings can also be used if that's your preference.